Special Provisions - Frequently Used (2020)
20SP-1001A-01 MIXING PORTLAND CEMENT CONCRETE - Use in all projects that include Portland cement concrete.
20SP-1002A-01 ALKALI SILICA REACTIVITY OF FINE AGGREGATE USED IN PORTLAND CEMENT CONCRETE - Use in all projects containing Portland cement concrete, except for the Road Commission for Oakland County and Wayne County DPS projects.
20SP-1002B-01 REDUCED TESTING FOR NON-CRITICAL CONCRETE PLACEMENTS - Use in all trunkline projects.
20SP-1003A-01 QUALITY INDEX FOR PORTLAND CEMENT CONCRETE - Use in all trunkline projects containing Portland cement concrete, including applications where the concrete is included in other items of work, such as fence posts and sign supports, for example. For Pre-cast Concrete items, include 20SP-708A.
20SP-1003B-01 QUALITY INDEX FOR PORTLAND CEMENT CONCRETE (FOR LOCAL AGENCY PROJECTS ONLY) - Use in all non-trunkline projects (except for Road Commission for Oakland County and Wayne County DPS projects) containing Portland cement concrete, including applications where the concrete is included in other items of work, such as fence posts and sign supports, for example. For Pre-cast Concrete items, include 20SP-708C.
20SP-101A-01 (Required)
20SP-101A-01 CONSTRUCTION MANAGEMENT - Use in all projects.
20SP-102A-01 PASS-THROUGH WARRANTY BONDS - Use in all projects with warranty requirements. Do not use in local agency projects. Do not use in heavy maintenance projects.
20SP-102B-01 MULTIPLE WARRANTIES - Use in all projects with more the one warranty bond requirement. Do not use in Local Agency projects. Do not use in heavy maintenance projects.
20SP-102C-01 (Required)
20SP-102C-01 DISSEMINATION OF PUBLIC RELATIONS INFORMATION - Use in all projects.
20SP-102D-01 (Required)
20SP-102D-01 NON-COMPLIANCE WITH CONTRACT REQUIREMENTS - Use in all projects.
20SP-102E-01 (Required)
20SP-102E-01 SUBLETTING CONTRACT WORK TO DISADVANTAGED BUSINESS ENTERPRISES - Use in all projects.
20SP-104A-01 VALUE ENGINEERING CHANGE PROPOSAL - Use in all projects except Construction Manager General Contractor (CMGC) and Design Build (DB) projects.
20SP-104B-02 DISPUTE REVIEW BOARD - Use in the following projects: Design-Build; Movable Bridges; Calendar Day Bid Projects (A+B); Projects with full cleaning and coating of structural steel for any single bridge with a quantity greater than 20,000 square feet; Projects with the special provision for Liquidated Damages for Other Department Costs containing cumulative damages greater than $25,000 per day (24 hours); Projects with any completion date incentive amount greater than $25,000 per day; Additional projects as requested by the Engineer. Do not use in local agency projects.
20SP-104C-02 (Required)
20SP-104C-02 CONSTRUCTION DOCUMENT MANAGEMENT - Use in all projects.
20SP-104D-01 (Required)
20SP-104D-01 PREVAILING WAGE AND LABOR COMPLIANCE SYSTEM - Use in all projects.
20SP-105A-05 (Required)
20SP-105A-05 SOURCE OF STEEL AND IRON (BUY AMERICA) - Use in all projects.
20SP-105B-03 (Required)
20SP-105B-03 SOURCE OF CONSTRUCTION MATERIALS - Use in all projects.
20SP-107A-01 SWEEPING - Use in all trunkline projects in the Metro Region. Use in non-Metro Region trunkline projects as requested by the TSC Construction Engineer. For Local Agency Programs projects use in all Metro Region projects except Local Agency Programs projects with the Road Commission for Oakland County.
20SP-107B-01 MIGRATORY BIRD PROTECTION - Use in bridge projects over water where the bottom of the structure is at least 3 feet above the water surface and other bridges where inspection determines it is needed. Also, use on projects that will result in vertical surfaces greater than 4 feet in height in sand or gravel banks and where soil will be stockpiled for long periods.
20SP-107C-02 (Required)
20SP-107C-02 E-VERIFY - Use in all projects.
20SP-107D-02 (Required)
20SP-107D-02 LABOR COMPLIANCE - Use in all projects.
20SP-107E-01 FEDERAL AVIATION ADMINISTRATION NOTIFICATION FOR STRUCTURE WORK - Use in all bridge projects.
20SP-107F-01 EASTERN MASSASAUGA RATTLESNAKE - Use in trunkline projects specified by the Environmental Services Section. Use in all local agency projects except for projects for the Road Commission for Oakland County (RCOC) where it will be optional.
20SP-107G-01 ENVIRONMENTALLY SENSITIVE AREAS - Use in all projects that include Environmentally Sensitive Areas on the plans.
20SP-108A-01 EXTENSION OF TIME AND INCREASED COSTS FOR INCENTIVE PROJECTS - Use in all time related incentive projects. The Special Provision for Critical Path Method Schedule must be used with this FUSP. Do not use with a No Excuse Incentive special provision. Do not use in local agency projects.
20SP-108B-01 CRITICAL PATH METHOD SCHEDULE - Use in projects in which the progress clause requires a Critical Path Method schedule and projects with time related incentives. Do not use in local agency projects unless requested by the local agency.
20SP-108C-02 (Required)
20SP-108C-02 UTILIZING DISADVANTAGED BUSINESS ENTERPRISE TRUCKING VENDORS - Use in all projects.
20SP-109A-01 (Required)
20SP-109A-01 PROMPT PAYMENT - Use in all projects.
20SP-204A-01 ASBESTOS REMOVAL AND DISPOSAL - Use where work consists of building or structure demolition, or renovation, where regulated asbestos-containing materials have been identified.
20SP-204B-01 VERTICAL EXPLORATORY INVESTIGATION FOR RELOCATION - Use in all projects where proposed construction may conflict with existing subsurface features unidentified through PA 174 of 2013. Do not use for exploratory digging to identify/explore utilities shown on plans or marked on site.
20SP-204C-02 ASBESTOS INVESTIGATION OF STRUCTURES - Use in all trunkline projects where work consists of structure demolition, or renovation, where the presence of regulated asbestos-containing materials is possible, but not known. Contact the Environmental Services Section and Bureau of Bridges and Structures before using this FUSP. This FUSP is intended for very limited use. Do not use in local agency projects.
20SP-204D-02 COMPLEX STRUCTURE DEMOLITION PLAN - Use in any project with full or partial demolition of structures with continuous spans > 200 feet, girders with horizontal curvature, field assembled suspension spans, movable bridges, cablestayed bridges, structures with cantilevered spans (including pin and hanger structures), post-tensioned concrete structures, continuous span cast-in-place concrete structures, and truss, tied arch, or other non-typical spans.
20SP-205A-01 NON-HAZARDOUS CONTAMINATED MATERIAL HANDLING AND DISPOSAL - Use in trunkline projects where non-hazardous contaminated materials are to be removed and disposed of, use with pay item. This FUSP is optional in local agency projects.
20SP-205B-01 (Required)
20SP-205B-01 TWELVE-INCH LAYER METHOD - Use in all projects.
20SP-208A-01 NON-COMPLIANCE WITH SOIL EROSION AND SEDIMENTATION CONTROL REQUIREMENTS - Use in all trunkline projects that involve earth disturbing activities. This FUSP is optional in local agency projects.
20SP-208B-01 EROSION CONTROL, INLET PROTECTION, FABRIC DROP - Use in all projects containing the pay item Erosion Control, Inlet Protection, Fabric Drop.
20SP-302A-02 AGGREGATE BASE COURSE - Use in all projects that include a temporary road or grade lift where an eight-inch aggregate base thickness is exceeded.
20SP-306A-01 MAINTENANCE GRAVEL, DRIVEWAY MAINTENANCE, AND INTERSECTION MAINTENANCE MEASUREMENT AND PAYMENT - Use in all projects that will have maintenance gravel, driveway maintenance, or intersection maintenance pay items.
20SP-307A-01 SHOULDER, CLASS II, TEMPORARY - Use in all projects where the Special Provision for Maintaining Traffic calls for a temporary shoulder widening.
20SP-401A-02 PIPE ALTERNATE FOR CULVERT CLASSES - Use in all trunkline projects with Class A or F culvert pay items for pipe diameters 36 inches or less and Class B culvert pay items for pipe diameters from 12 to 24 inches. This FUSP is optional for local agency projects.
20SP-401B-01 PIPE ALTERNATE FOR CULVERT CLASSES FOR ROADWAYS WITH AVERAGE DAILY TRAFFIC OF 20,000 OR LESS - Use in all trunkline projects with Class A or F Culvert pay items with pipe diameter greater than 36 inches up to 48 inches and on roadways with ADT of 20,000 or less. This FUSP is optional for local agency projects.
20SP-402A-02 PIPE ALTERNATE FOR STORM SEWER CLASSES - Use in all trunkline projects with Class A Storm Sewer pay items with pipe diameters 36 inches or less and Class B Storm Sewer pay items with pipe diameters from 12 inches to 24 inches. This FUSP is optional for local agency projects.
20SP-403A-02 ADJUSTING DRAINAGE STRUCTURE, CASE 1, MODIFIED - Use in all resurfacing projects in the Metro Region that include drainage structure adjustment in the scope of work or in other regions as desired. This FUSP is optional for local agency projects.
20SP-404A-01 VIDEO INSPECTION OF UNDERDRAIN - Use in all trunkline projects that have a pay item for underdrain. This FUSP is optional for Local Agency Projects.
20SP-406A-01 BOX CULVERT JOINT TIE ASSEMBLIES - Use in all projects with a box culvert of any size.
20SP-406B-02 REVISIONS TO PRECAST THREE-SIDED, ARCH, AND BOX CULVERTS - Use in all projects that reference 406 of the Standard Specifications for Construction.
20SP-406C-01 PRECAST CONCRETE CULVERTS UTILIZING SELF-CONSOLIDATING CONCRETE - Use in all trunkline projects that reference 406 of the Standard Specifications for Construction. Do not use in local agency projects.
20SP-500A-02 MATERIALS AND WORKMANSHIP WARRANTY - Use in all trunkline projects calling for a materials and workmanship warranty. Do not use in local agency projects. Do not use in heavy maintenance projects.
20SP-500B-03 PAVEMENT PERFORMANCE WARRANTY - Use in all trunkline projects calling for a pavement performance warranty. Do not use in local agency projects. Do not use in heavy maintenance projects.
20SP-501A-01 SAMPLING ASPHALT BINDER ON LOCAL AGENCY PROJECTS - Use in all local agency projects having hot mix asphalt pay items.
20SP-501B-01 WARM-MIX ASPHALT PERMISSIVE USE FOR LOCAL AGENCY PROJECTS - Use when requested by the local agency.
20SP-501C-03 PRICE ADJUSTMENTS ON PERFORMANCE GRADE ASPHALT BINDERS - Use in all hot mix asphalt trunkline projects. Do not use in local agency projects.
20SP-501D-01 HOT MIX ASPHALT MATERIAL TRANSFER DEVICE - Use in all limited access trunkline rehabilitation and reconstruction projects with a single mixture quantity above 7,500 tons other than Stone Matrix Asphalt (SMA). Use in all rehabilitation and reconstruction and CPM projects utilizing SMA mixtures with a single mixture quantity above 5,000 tons. Use on shoulders paved in a separate operation with inadequate base conditions identified on the plans and more than 5000 tons of HMA for an individual paving course.
20SP-501E-01 RECYCLED TIRE RUBBER MODIFIED HOT MIX ASPHALT MIXTURES PERMISSIVE USE - Use in all trunkline Hot Mix Asphalt projects.
20SP-501F-01 RECYCLED HOT MIX ASPHALT MIXTURE ON LOCAL AGENCY PROJECTS - Use in all local agency HMA projects, except Road Commission of Oakland County local agency projects and any projects that prohibits the use of RAP in the specified HMA mixtures.
20SP-501G-01 MARSHALL HOT MIX ASPHALT MIXTURE - Use in all projects that include Marshall HMA.
20SP-501H-01 RECYCLED HOT MIX ASPHALT AND RECYCLED ASPHALT SHINGLES IN SUPERPAVE MIXTURES - Use in all trunkline Hot Mix Asphalt projects. Do not use in local agency projects.
20SP-501I-01 ACCEPTANCE OF HOT MIX ASPHALT MIXTURE ON LOCAL AGENCY PROJECTS - Use on all local agency HMA projects except Road Commission for Oakland County, Wayne County DPS and Macomb County Road Department projects, or when a unique FHWA approved special provision on this topic from the local agency is included in the project proposal. The Special Provision for Hot Mix Asphalt Prices for Adjustments must be used with this FUSP.
20SP-501J-02 FINE TEXTURE MILLING AND MICRO TEXTURE MILLING HOT MIX ASPHALT PAVEMENT - Use on all projects with either of the following: 1) Use on one course, non-freeway mill and resurface projects where the integrity of the existing pavement makes it suitable to allow traffic to be maintained on a milled surface for up to 72 hours and where it is desirable to expedite the project schedule and/or increase production paving. OR, 2) Use on Capital Preventive Maintenance (CPM) projects to mill distressed surface seals and construct another surface seal or use to mill HMA surface deficiencies as a standalone treatment.
20SP-501K-02 PAVEMENT RIDE QUALITY (MEAN ROUGHNESS INDEX ACCEPTANCE CRITERIA) - Use on all new concrete and multiple course HMA paving projects greater than 1 mile long. Also use on the following projects of any length: a) cold milling and one course HMA overlays, b) one course HMA overlays and c) diamond grinding projects. Consult with CFS Division before using on urban non-freeway projects. Fill out and include 20TM501(A155) SP for Ride Quality Limits, and include 20RC501(A320) SP for Bump Grinding and include either the Recommended SP for Managing Diamond Grinding Slurry from Ride Quality HMA or Managing Diamond Grinding Slurry From Ride Quality Concrete in the proposal when using this FUSP. Do not use on Local Agency projects except for new concrete or multiple course HMA paving projects on NHS routes. Add 20RC501-A325-02 SP for Ride Quality Incentive for all projects with Class I Ride Quality and/or Class II Ride Quality with Incentives.
20SP-501L-01 WARRANTY WORK REQUIREMENTS FOR NEW/RECONSTRUCTED HOT MIX ASPHALT PAVEMENT ON UNBONDED OR STABLILIZED BASE - Use in all New and Reconstructed HMA Pavement projects. Do not use on local agency projects. Do not use in heavy maintenance projects.
20SP-501M-01 WARRANTY WORK REQUIREMENTS FOR MULTIPLE COURSE HOT MIX ASPHALT OVERLAYS ON CONCRETE PAVEMENT; MULTIPLE COURSE HOT MIX ASPHALT OVERLAYS ON COMPOSITE PAVEMENT; MULTIPLE COURSE HOT MIX APSPHALT OVERLAYS ON FLEXIBLE PAVEMENT - Use in all trunkline HMA overlay projects which include EMH, EH, and Stone Matrix Asphalt (SMA) Mixtures. Do not use in local agency projects. Do not use in heavy maintenance projects.
20SP-501N-01 WARRANTY WORK REQUIREMENTS FOR HOT MIX ASPHALT PAVEMENT ON RUBBLIZED CONCRETE - Use in all projects which include HMA Placed on Rubblized concrete. Do not use on local agency projects. Do not use in heavy maintenance projects.
20SP-501O-01 WARRANTY WORK REQUIREMENTS FOR HOT MIX ASPHALT PLACED ON CRUSH AND SHAPE - Use in all trunkline crush and shape projects. Do not use in local agency projects. Do not use in heavy maintenance projects.
20SP-501P-01 WARRANTY WORK REQUIREMENTS FOR COLD MILLING AND ONE COURSE HOT MIX ASPHALT OVERALY (CAPITAL PREVENTIVE MAINTENANCE) - Use in all trunkline cold mill and one course HMA overlay projects in the CPM program whose costs exceed $2,000,000. Do not use in Local Agency Projects. Do not use in heavy maintenance projects.
20SP-501Q-01 WARRANTY WORK REQUIREMENTS FOR ONE COURSE HOT MIX ASPHALT OVERLAY (CAPITAL PREVENTIVE MAINTENANCE) - Use in all trunkline one course HMA overlay projects in the CPM program whose costs exceed $2,000,000. Do not use in local agency projects. Do not use in heavy maintenance projects.
20SP-501R-06 SUPERPAVE HOT MIX ASPHALT PERCENT WITHIN LIMITS - Use in all HMA projects using superpave mixtures, except CPM projects. Include the pay item HMA Quality Initiative. Do not use in local agency projects. The Special Provision for Hot Mix Asphalt Prices for Adjustments must be used with this FUSP.
20SP-501S-05 SUPERPAVE HOT MIX ASPHALT PERCENT WITHIN LIMITS FOR CAPITAL PREVENTIVE MAINTENANCE MILL & RESURFACE PROJECTS AND CAPITAL PREVENTIVE MAINTENANCE ONE COURSE OVERLAY PROJECTS - Use in all cold mill and one course HMA overlays and one course HMA overlay resurfacing projects in the CPM program. Do not use in Local Agency projects. The Special Provision for Hot Mix Asphalt Prices for Adjustments must be used with this FUSP.
20SP-501T-01 HOT MIX ASPHALT SHOULDER DENSITY IN CONJUNCTION WITH SUPERPAVE HOT MIX ASPHALT PERCENT WITHIN LIMITS - Use in all HMA projects that include FUSP 20SP-501R Superpave Hot Mix Asphalt Percent Within Limits or 20SP-501S Superpave Hot Mix Asphalt Percent Within Limits For Capital Preventive Maintenance Mill & Resurface Projects And Capital Preventive Maintenance One Course Overlay Projects. The Special Provision for Hot Mix Asphalt Prices for Adjustments must be used with this FUSP.
20SP-501U-02 ACCEPTANCE OF LONGITUDINAL JOINT DENSITY IN HOT MIX ASPHALT PAVEMENTS - Use in all trunkline HMA projects, except shared use paths. For Capital Preventive Maintenance (CPM) projects on composite pavements with existing longitudinal joint distress consult the HMA Operations Unit at Construction Field Services. Do not use in local agency projects.
20SP-501V-01 WARM-MIX ASPHALT PERMISSIVE USE - Use in all trunkline projects specifying a Superpave HMA mixture type SMA, EH, EMH, EML, EL.
20SP-501W-01 SAFETY EDGE - Use in all projects that require the use of the safety edge.
20SP-502A-02 WARRANTY WORK REQUIREMENTS FOR HOT MIX ASPHALT CRACK TREATMENT (CAPITAL PREVENTIVE MAINTENANCE) - Use in all trunkline projects on asphalt pavements, unless approved by the Statewide Warranty Engineer. Do not use in local agency projects.
20SP-502B-02 HOT MIX ASPHALT CRACK TREATMENT AND OVERBAND MATERIAL - Use on all HMA Crack Treatment and Overband Crack Fill projects referencing section 502 of the Standard Specifications for Construction. This includes stand-alone crack treatment projects and overband pre-treatment prior to surface seals. This FUSP is optional for local agency projects.
20SP-503A-02 WARRANTY WORK REQUIREMENTS FOR PAVER PLACED SURFACE SEAL (CAPITAL PREVENTIVE MAINTENANCE) - Use in all paver placed surface seal projects that are warranted unless approved by the Statewide Warranty Engineer. Do not use on local agency projects. Do not use in heavy maintenance projects.
20SP-504A-04 WARRANTY WORK REQUIREMENTS FOR MICRO-SURFACING (CAPITAL PREVENTIVE MAINTENANCE) - Use in all micro-surfacing projects that are warranted unless approved by Statewide Warranty Engineer. Do not use on local agency projects. Do not use in heavy maintenance projects.
20SP-504B-02 WARRANTY WORK REQUIREMENTS FOR HOT MIX ASPHALT ULTRA-THIN OVERLAY (CAPITAL PREVENTIVE MAINTENANCE) - Use in all trunkline Ultra-thin overlay projects in the CPM program unless approved by the Statewide Warranty Engineer. Do not use in local agency projects. Do not use in heavy maintenance projects.
20SP-505A-01 WARRANTY WORK REQUIREMENTS FOR SINGLE CHIP SEALS (CAPITAL PREVENTIVE MAINTENANCE) - Use in all single chip seal projects which are warranted unless approved by the Statewide Warranty Engineer. Do not use on local agency projects. Do not use in heavy maintenance projects.
20SP-505B-01 WARRANTY WORK REQUIREMENTS FOR DOUBLE CHIP SEALS (CAPITAL PREVENTIVE MAINTENANCE) - Use in all double chip seal projects which are warranted unless approved by the Statewide Warranty Engineer. Do not use on local agency projects. Do not use in heavy maintenance projects.
20SP-602A-01 PAVEMENT ACCEPTANCE FOR JOINTED PLAIN CONCRETE PAVEMENT - Use on all projects specifying non-reinforced concrete, excludes base courses.
20SP-602B-01 WARRANTY WORK REQUIREMENTS FOR NEW/RECONSTRUCTED JOINTED PLAIN CONCRETE PAVEMENT - Use in all trunkline New/Reconstructed non-reinforced concrete pavement projects. Do not use in local agency projects. Do not use in heavy maintenance projects.
20SP-602C-02 PRESSURE RELIEF JOINT - Use in all projects with the pay item Joint, Pressure Relief.
20SP-602E-01 CURING CONCRETE PAVEMENT SURFACES - Use in all trunkline concrete pavement reconstruction projects (including shoulders and ramps, and unbonded concrete overlays).
20SP-603A-02 LONGITUDINAL GROOVING OF CONCRETE PAVEMENT - Use on CPM and R&R diamond grinding projects that contain coarse aggregate AWI (aggregate wear index) of less than 260 and ADT (average daily traffic) of over 4000.
20SP-603B-01 CONCRETE PAVEMENT REPAIRS - Use in all projects with concrete pavement repairs.
20SP-705A-01 QUALITY CONTROL PLAN FOR WELDING PILE SPLICES - Use in all projects with non-main member steel piling.
20SP-706A-02 SEALING LOCALIZED CRACKS - Use on all bridges with newly constructed bridge decks, overlay surfaces, deck patches, and joint replacements. Use on all bridges that have concrete bridge deck pay items. Do not use on bridges that have Healer Sealer or Thin Epoxy Overlay pay items.
20SP-706B-02 MECHANICALLY STABILIZED EARTH RETAINING WALL SYSTEM - Use in all projects utilizing MSE wall systems.
20SP-706C-02 POLYURETHANE JOINT SEALANT FOR STRUCTURES - Use when sealing new construction joints.
20SP-706D-01 FINISHING AND CURING OF NIGHT CAST STRUCTURAL CONCRETE - Use in all projects with Superstructure Conc, Night Casting or Superstructure Conc, Night Casting, High Performance pay items.
20SP-707A-02 STRUCTURAL STEEL AND ALUMINUM CONSTRUCTION - Use in all projects having structural steel or structural aluminum used for constructing permanent bridges, temporary bridges, highway structures, foundation piling, cofferdams, sheet piling, and miscellaneous structural steel members required to be fabricated in accordance with: AWS D1.1, Structural Welding Code - Steel; AWS D1.2, Structural Welding Code - Aluminum; or AASHTO/AWS D1.5 - Bridge Welding Code.
20SP-707B-01 MODULAR BRIDGE JOINT SYSTEM - Use on bridge projects where movement required at the expansions joint(s) exceeds the capability of standard strip seal expansion systems contained on the EJ3 and EJ4 Special Details. Use with pay item.
20SP-707C-03 METAL MESH PANELS - Use in all projects with the pay item Metal Mesh Panels.
20SP-707D-02 COMPLEX STEEL ERECTION SHORING AND FALSEWORK - Use in any project with continuous spans > 200 feet, girders with horizontal curvature, field assembled suspension spans, movable bridges, cablestayed bridges, and truss, tied arch, or other non-typical spans.
20SP-707E-02 PREFABRICATED STEEL PEDESTRIAN BRIDGE, TYPE 1 - Use in all trunkline projects where the pedestrian bridge will be constructed over a public roadway. Do not use on Local Agency Projects.
20SP-707F-02 PREFABRICATED STEEL PEDESTRIAN BRIDGE, TYPE 2 - Use in all trunkline projects containing a pedestrian bridge where a Type 1 Pedestrian Bridge is not required. Do not use on Local Agency Projects.
20SP-707G-01 STRUCTURAL STEEL DIAPHRAGMS FOR PRESTRESSED CONCRETE BEAMS - Use in all prestressed concrete beam projects with structural steel diaphragms.
20SP-707H-01 DIGITAL RADIOGRAPHY IN STRUCTURAL STEEL FABRICATION - Use in all trunkline projects having structural steel use for constructing permanent/temporary bridges and when radiographic testing is required for weld inspection. Do not use in local agency projects.
20SP-708A-03 QUALITY CONTROL AND ACCEPTANCE OF STRUCTURAL PRECAST CONCRETE - For use through the June 2025 letting only. Use in all trunkline projects containing Portland cement concrete used in structural precast (non-prestressed and prestressed) concrete products [bridge beams, culverts (span length equal to or greater than 10 feet measured from inside of exterior walls, parallel to the roadway centerline), mechanically stabilized earth walls, prefabricated bridge element systems, sound walls, spun concrete poles] and other elements required to be accepted based on "Fabrication Inspection" per MDOT's Materials Quality Assurance Manual or as specified in the contract. Do not use in local agency projects.
20SP-708A-04 QUALITY CONTROL AND ACCEPTANCE OF STRUCTURAL PRECAST CONCRETE - Use in all trunkline projects containing Portland cement concrete used in structural precast (non-prestressed and prestressed) concrete products [bridge beams, culverts (span length equal to or greater than 10 feet measured from inside of exterior walls, parallel to the roadway centerline), mechanically stabilized earth walls, prefabricated bridge element systems, sound walls, spun concrete poles] and other elements required to be accepted based on "Fabrication Inspection" per MDOT's Materials Quality Assurance Manual or as specified in the contract. Do not use in local agency projects.
20SP-708B-02 PRESTRESSED CONCRETE 28-DAY CONCRETE STRENGTH - Use in all trunkline projects that include the fabrication of prestressed concrete beams. This FUSP is optional for local agency projects.
20SP-708C-03 QUALITY CONTROL AND ACCEPTANCE OF STRUCTURAL PRECAST CONCRETE FOR LOCAL AGENCY PROJECTS ONLY - For use through the June 2025 letting only. Use in all non-trunkline projects containing Portland cement concrete used in structural precast (non-prestressed and prestressed) concrete products [bridge beams, culverts (span length equal to or greater than 10 feet measured from inside of exterior walls, parallel to the roadway centerline), mechanically stabilized earth walls, prefabricated bridge element systems, sound walls, spun concrete poles] and other elements required to be accepted based on "Fabrication Inspection" per MDOT's Materials Quality Assurance Manual or as specified in the contract
20SP-708C-04 QUALITY CONTROL AND ACCEPTANCE OF STRUCTURAL PRECAST CONCRETE FOR LOCAL AGENCY PROJECTS ONLY - Use in all non-trunkline projects containing Portland cement concrete used in structural precast (non-prestressed and prestressed) concrete products [bridge beams, culverts (span length equal to or greater than 10 feet measured from inside of exterior walls, parallel to the roadway centerline), mechanically stabilized earth walls, prefabricated bridge element systems, sound walls, spun concrete poles] and other elements required to be accepted based on "Fabrication Inspection" per MDOT's Materials Quality Assurance Manual or as specified in the contract.
20SP-708E-01 REVISIONS TO STRUCTURAL PRESTRESSED CONCRETE CONSTRUCTION - Use in all projects that reference 708 of the Standard Specifications for Construction.
20SP-708F-01 PRESTRESSED CONCRETE BRIDGE BEAM UTILIZING SELF-CONSOLIDATING CONCRETE - Use in all trunkline projects that reference 708 of the Standard Specifications for Construction. Do not use in local agency projects.
20SP-710A-02 WARRANTY ON CONCRETE SURFACE COATING - Use in trunkline projects specifying concrete surface coating, except for projects where only small portions of structural elements are being coated as part of repairs. Do not use on local agency projects.
20SP-710B-03 PENETRATING HEALER SEALER ON BRIDGE DECKS - Use in all projects with the pay item Penetrating Healer/Sealer, Bridge Deck.
20SP-710C-02 SUBSTRUCTURE HORIZONTAL SURFACE SEALER - Use in all projects with newly constructed and rehabilitated concrete substructures.
20SP-711A-01 BRIDGE RAILING, 3 TUBE WITH PICKETS - Use in all projects using MDOT's Standard Plan B-27 railing.
20SP-711B-02 BRIDGE RAILING, CONCRETE BLOCK RETROFIT - Use in all projects that utilize Standard Plan B-50-Series; Bridge Railing, Concrete Block Retrofit. Do not use for projects in the Superior Region. Use on local agency projects when high performance mix is required.
20SP-711C-01 BRIDGE RAILING, CONCRETE BLOCK RETROFIT NON-HIGH PERFORMANCE - Use in all Superior Region projects that utilize Standard Plan B-50-Series; Bridge Railing, Concrete Block Retrofit. Use on local agency projects unless high performance mix is required. When high performance mix is required, use FUSP 711B in place of this FUSP.
20SP-711D-01 REVISIONS TO BRIDGE RAILINGS - Use in all projects with pay items from 711 of the Standard Specifications for Construction.
20SP-712A-01 MANAGING HYDRODEMOLITION RUNOFF WATER - Use in all projects which include hydrodemolition. Use with pay item. The bridge owner (MDOT or Local Agency) must obtain the generator site identification number for the bridge prior to the start of the hydrodemolition work.
20SP-712B-02 THIN EPOXY POLYMER BRIDGE DECK OVERLAY - Use in all thin epoxy overlay projects which do not have a warranty. Use with the pay item Epoxy Ovly.
20SP-712C-02 PERFORMANCE WARRANTY, THIN EPOXY POLYMER BRIDGE DECK OVERLAY - Use in all trunkline thin epoxy overlay projects which are warranted. Do not use in local agency projects. Do not use heavy maintenance projects.
20SP-712D-02 REMOVAL OF THIN EPOXY POLYMER BRIDGE DECK OVERLAY - Use in all projects with the pay item Epoxy Ovly, Rem.
20SP-712E-01 BRIDGE DECK REMOVAL AND SALVAGING SHEAR DEVELOPERS ON STEEL BEAMS - Use on all projects with partial or complete deck replacement where the existing superstructure is steel and there are stud shear developers. Do not use on bridges that are known to have coil or spiral shear developers.
20SP-712F-01 BRIDGE DECK REMOVAL ON STEEL BEAMS - Use on all projects with partial or complete deck replacement where the existing superstructure is steel and the existing shear developers are not stud shear developers. Do not use on bridges that are known to have stud shear developers or where the type of existing shear developer is not known.
20SP-713A-02 HEAT STRAIGHTENING DAMAGED STRUCTURAL STEEL - Use in all trunkline projects requiring Structural Steel heat straightening. Do not use on Local Agency projects.
20SP-713B-01 TEMPORARY SUPPORT ALTERNATE DESIGN - Use on all projects where temporary supports are required (column, diaphragm, or suspension type temporary supports).
20SP-715A-03 WARRANTY ON BRIDGE COATING - Use in trunkline projects requiring complete bridge painting. Do not use on local agency projects.
20SP-715B-01 PROVIDING EXPOSURE ASSESSMENTS, EXPOSURE MONITORING, EQUIPMENT, HYGIENE FACILITIES, AND TRAINING - Use with pay items for painting steel bridge projects, repairing steel bridges, removing structures with steel beams, and for painting faying surfaces.
20SP-716A-01 COATING OF GALVANIZED LIGHTING, SIGNAL, SIGN, AND MISCELLANEOUS SUPPORT STRUCTURES - Use in all projects that require coating of galvanized lighting, signal, sign, and miscellaneous support structures.
20SP-716B-01 REVISIONS TO SHOP CLEANING AND COATING STRUCTURAL STEEL - Use in all projects requiring shop cleaning and coating of structural steel.
20SP-718A-01 DYNAMIC MESSAGE SIGN FOUNDATION - Use in all projects requiring a Dynamic Message Sign Foundation. This FUSP is optional for local agency projects
20SP-800A-02 HIGH FRICTION SURFACE TREATMENT - Use in all projects with the pay item High Friction Surface Treatment.
20SP-802A-03 ALTERNATE REINFORCEMENT FOR CONCRETE CURB AND GUTTER - Use in all trunkline projects that have concrete curb or concrete curb and gutter pay items. This FUSP is optional in local agency projects.
20SP-802B-01 (Required)
20SP-802B-01 BACKFILL FOR CONCRETE CURB, GUTTER, AND DIVIDERS - Use in all projects.
20SP-803A-01 SIDEWALK, CLAY BRICK PAVERS ON SAND BED - Use with pay items: Sidewalk, Clay Brick Pavers or Sidewalk, Clay Brick Pavers, Rem.
20SP-804A-02 CONCRETE BARRIERS, GLARE SCREENS, BRIDGE BARRIER RAILINGS, AND FOUNDATIONS FOR LIGHT STANDARDS - Use in all projects calling for MASH-compliant, single slope permanent concrete barriers (PCBs), single-slope bridge barrier railings, and related features: single-face PCB, double-face PCB, glare screens, double-face PCB transition to guardrail median anchorage, bridge barrier railings, and light standard foundations.
20SP-807A-01 LOW-TENSION CABLE BARRIER - Use in all projects calling for low-tension cable barrier (Standard Plan R-70 Series).
20SP-807B-03 HIGH TENSION CABLE BARRIER - Use in all projects calling for new high tension cable barrier installation.
20SP-807C-01 HIGH TENSION CABLE BARRIER SPARE PARTS AND REPAIRS DURING CONSTRUCTION - Use in all projects requiring repair of new or existing HTCB installations during construction. Not for use with HTCB maintenance contracts.
20SP-807D-01 HIGH TENSION CABLE BARRIER MAINTENANCE KIT - Use in all projects calling for new HTCB installation, and where local maintenance forces do not have special tools required to maintain HTCB.
20SP-807E-02 REMOVING, SALVAGING, AND RECONSTRUCTING HIGH TENSION CABLE BARRIER - Use in projects that call for the removing, salvaging or reconstruction of high tension cable barrier.
20SP-807F-02 GUARDRAIL APPROACH TERMINAL, TYPE 2M AND GUARDRAIL APPROACH TERMINAL, TYPE 2M, TEMPORARY - For use through the June 2025 letting only. Use in all projects calling for Guardrail Approach Terminal, Type 2M and Guardrail Approach Terminal, Type 2M, Temp.
20SP-807F-03 GUARDRAIL APPROACH TERMINAL, TYPE 2M AND GUARDRAIL APPROACH TERMINAL, TYPE 2M, TEMPORARY - Use in all projects calling for Guardrail Approach Terminal, Type 2M and Guardrail Approach Terminal, Type 2M, Temp.
20SP-807G-01 GUARDRAIL LONG SPAN - Use in all projects utilizing MGS guardrail long span details from Standard Plan R-72-Series.
20SP-807H-01 GUARDRAIL, CURVED GUARDRAIL, AND TEMPORARY GUARDRAIL - Use in all projects calling for new guardrail, curved guardrail, and temporary guardrail.
20SP-807I-01 GUARDRAIL, CURVED, TYPE B-CRT - Use in all projects utilizing Special Detail 21.
20SP-807J-01 GUARDRAIL APPROACH TERMINAL, TYPE 3M and GUARDRAIL APPROACH TERMINAL, TYPE 3M, TEMP - For use through the June 2025 letting only. Use in all projects calling for Guardrail Approach Terminal, Type 3M and Guardrail Approach Terminal, Type 3M, Temp.
20SP-807J-02 GUARDRAIL APPROACH TERMINAL, TYPE 3M and GUARDRAIL APPROACH TERMINAL, TYPE 3M, TEMP - Use in all projects calling for Guardrail Approach Terminal, Type 3M and Guardrail Approach Terminal, Type 3M, Temp.
20SP-810A-03 INSTALLATION, INSPECTION, REPORTING, AND PAYMENT SCHEDULE FOR OVERHEAD SIGN SUPPORTS, TRAFFIC SIGNALS, TOWERS, AND LIGHTING STRUCTURES - Use in all trunkline projects with cantilever sign supports, truss sign supports, DMS sign supports, traffic signal mast arm poles, strain poles, frangible light standards, non-frangible light standards, ESS tower, and tower lighting units. This includes salvaged items. Do not use in local agency projects.
20SP-810D-01 TRUSS, TYPE E, WALL MOUNTED SUPPORTS - Use on all trunkline projects with Type E truss with wall mounted supports. Do not use in local agency projects.
20SP-810E-02 SIGN, REMOVE, SALVAGE - Use in all trunkline projects calling for removal of signs to be salvaged. Use with the pay item Sign, Type __, Rem, Salv. This FUSP is optional in local agency projects.
20SP-810F-02 GROUND MOUNTED SIGN SUPPORTS, REMOVE - Use in all projects that require the removal of ground mounted sign supports.
20SP-810G-01 SIGN SUPPORT REMOVAL - Use in all trunkline projects that include the removal of Type I signs, sign cantilevers, sign trusses, column breakaways, or bridge sign connections. Do not use in local agency projects. The Transporting Salv MDOT Materials pay item must be a federal aid non-participating pay item.
20SP-810H-01 PERMANENT TRAFFIC SIGNS AND SUPPORTS REVISIONS - Use in all projects that reference 810.N of the Standard Specifications for Construction to install and tighten anchor bolts.
20SP-810I-02 FLEXIBLE DELINEATORS - Use in all projects installing permanent flexible delineators.
20SP-810J-01 H BRACKETS - Use in all projects with Type IIIA and Type IIIB permanent signing pay items.
20SP-811A-02 PROTECTIVE OVERLAY FOR PAVEMENT AT SNOWMOBILE TRAIL CROSSINGS - Use in all projects calling for a protective overlay for pavement at snowmobile trail crossings and containing pay item Protective Ovly, Snowmobile Trail Crossing.
20SP-811B-02 WET REFLECTIVE WATERBORNE AND SPRAYABLE THERMOPLASTIC - Use in all projects installing wet reflective waterborne or sprayable thermoplastic pavement markings.
20SP-811C-01 PAVEMENT MARKING EQUIPMENT - Use in all projects calling for permanent pavement markings.
20SP-811D-01 RECESSED PAVEMENT MARKINGS - Use in all projects installing recessed pavement markings.
20SP-811E-01 DATA LOGGING SYSTEM FOR POLYUREA AND MODIFIED EPOXY PAVEMENT MARKINGS - Use in all projects calling for at least 10,000 feet of a single color (white or yellow) of polyurea or modified epoxy pavement markings. This FUSP is optional for Local Agency projects.
20SP-811F-01 DATA LOGGING SYSTEM FOR SPRAYABLE THERMOPLASTIC PAVEMENT MARKINGS - Use in all projects calling for at least 10,000 feet of a single color (white or yellow) of sprayable thermoplastic pavement markings. This FUSP is optional for Local Agency projects.
20SP-811G-01 DATA LOGGING SYSTEM FOR WATERBORNE, REGULAR DRY, AND TYPE NR PAVEMENT MARKINGS - Use in all projects calling for at least 10,000 feet of a single color (white or yellow) of waterborne, regular dry, or Type NR pavement markings. This FUSP is optional for Local Agency projects.
20SP-812A-02 MOBILE ATTENUATOR - Use in all projects that require pavement markings to be placed under traffic in a convoy. Also, use in all projects where personnel are exposed to traffic under conditions defined in the special provision for use of shadow or barrier vehicles, aerial operations and mobile/short duration operations. Mobile attenuators are not intended to be used for the removal, installation or maintenance of traffic signals.
20SP-812B-01 WORK ZONE SIGNING ON LOCAL AGENCY PROJECTS - Use only in local agency projects that elect to include Injure/Kill and Traffic Fines Doubled advance work zone regulatory signing in the maintaining traffic plan.
20SP-812C-01 PORTABLE WATER FILLED BARRIER (NATIONAL COOPERATIVE HIGHWAY RESEARCH PROGRAM REPORT 350/MANUAL FOR ASSESSING SAFETY HARDWARE, TEST LEVEL 3) - Use in all projects calling for portable water filled barrier.
20SP-812D-01 TEMPORARY PORTABLE RUMBLE STRIPS - Use on all Trunkline Regulating projects with existing speed limits 45mph or higher where traffic regulating will be in place longer than 4 hours. Optional use for local agency and all other Trunkline projects.
20SP-812E-01 TEMPORARY PEDESTRIAN TYPE II BARRICADE - Use in all projects with Pedestrian Type II Barricade, Temp pay item.
20SP-812F-01 TEMPORARY PEDESTRIAN TYPE II CHANNELIZER - Use on all projects with Pedestrian Type II Channelizer, Temp pay item.
20SP-812G-02-TEMPORARY PEDESTRIAN PATH - Use on all projects with Pedestrian Path, Temp pay item.
20SP-812H-01 TEMPORARY PEDESTRIAN RAMP - Use on all projects with Pedestrian Ramp, Temp pay item.
20SP-812I-02 REBUILDING MICHIGAN SIGNS - Use on all projects with Rebuilding Michigan funding, or any projects designated as backfill projects as part of Rebuilding Michigan. Do not use in Local Agency projects.
20SP-812J-01 TEMPORARY SPEED RADAR TRAILER - Use in all freeway projects where the existing speed limit is 55 mph or higher and a speed reduction is required during construction for longer than 3 days. Optional use for local agency and all other trunkline projects.
20SP-812K-02 TEMPORARY GLARE SCREEN BLADES - Use in all trunkline projects calling for Glare Screen, Temp. This FUSP is optional for Local Agency projects.
20SP-812L-02 TEMPORARY PORTABLE TRAFFIC SIGNALS - Use in all projects with the pay items PTS, Temp, Furn or PTS, Temp Oper.
20SP-812M-01 ROLL-UP SIGNS - Use in all trunkline projects requiring temporary traffic control. This FUSP is optional in local agency projects.
20SP-812N-01 BIPARTISAN INFRASTRUCTURE LAW SIGNS ON FREEWAYS - Use in all trunkline freeway projects with federal funding and an engineer's estimate equal to or greater than $10,000,000. Do not use on local agency projects.
20SP-812O-01 BIPARTISAN INFRASTRUCTURE LAW SIGNS ON NON-FREEWAYS - Use in all trunkline non-freeway projects with federal funding and an engineer's estimate equal to or greater than $10,000,000. Do not use on local agency projects unless requested by the local agency.
20SP-812P-01 SIGN, PORTABLE, CHANGEABLE MESSAGE - Use in all trunkline projects requiring temporary traffic control. This FUSP is optional in local agency projects.
20SP-812Q-01 CONNECTED LIGHTED ARROW, TYPE C - Use in all trunkline projects calling for a Type C Arrow Board. This FUSP is optional for Local Agency Projects.
20SP-815A-02 LANDSCAPE PLANTS SOURCE LIST - Use in all landscape projects.
20SP-815B-01 UNACCEPTABLE PLANT REMOVAL - Use in all projects that include landscape plantings.
20SP-815C-02 LANDSCAPING - Use in all landscaping projects.
20SP-816A-02 GRASS SEED TESTING - Use in all trunkline projects that include more than 24,200 square yards (5 acres) or 1100 pounds of cool season grass(es). This FUSP is optional for local agency projects.
20SP-816B-01 EXCAVATED TOPSOIL OR SALVAGED TOPSOIL - Use in all projects where salvaged topsoil is intended for use.
20SP-819A-01 METRO REGION FREEWAY LIGHTING COORDINATION - Use for all Metro Region Projects involving Freeway Lighting. The existing Metro Region Freeway Lighting System is currently operated and maintained by the Freeway Lighting Partners (FLP) on behalf of MDOT. There are unique coordination requirements to be performed as part of this project.
20SP-819B-01 LIGHT STANDARD ARM, INSTALL SALVAGED - Use in all projects that have the Pay Item Light Std Arm, Install Salv.
20SP-819C-01 LIGHT STANDARD SHAFT, INSTALL SALVAGED - Use in all projects that have the Pay Item Light Std Shaft, Install Salv.
20SP-820A-03 STEEL STRAIN POLE - Use in all projects with pay item: Strain Pole, Steel, 6 bolt, Size __.
20SP-820AA-01 WIRELESS INTERCONNECT, SIGN MOUNTED FLASHER, SALVAGE - Use in all projects that have the pay item Wireless Intercn, Sign Mtd Flasher, Salv.
20SP-820B-03 CELLULAR MODEM, TRAFFIC SIGNAL - Use in all trunkline projects requiring a new Cellular Modem for Traffic Signal Communications, or to Salvage an existing Cellular Modem. Use with pay items Cellular Modem, TS, 4th G, or Cellular Modem, Salv. This FUSP is optional for Local Agency projects.
20SP-820BB-01 PRECAST CONCRETE PEDESTAL SIGNAL FOUNDATION AND PRECAST UNDERGROUND SERVICE PEDESTAL (METAL) FOUNDATION - Use in all projects with pedestal signal foundations and underground service (metal) foundation.
20SP-820C-01 SPLICE BOX - Use in all projects with the pay items: Splice Box; Splice Box, Rem.
20SP-820CC-03 ACCESSIBLE PEDESTRIAN SIGNAL SYSTEM - Use in all trunkline projects with any of the following the pay items: Pedestrian Signal System, Accessible; Push Button Station; Push Button Station and Sign; Pedestrian Signal System, Accessible, Rem; Push Button Station, Rem. This FUSP is optional for local agency projects.
20SP-820D-01 SPAN WIRE JUNCTION BOX - Use in all projects with the pay items: Junction Box, Span Wire; Junction Box, Rem.
20SP-820DD-01 WIRELESS INTERCONNECT FOR CLOSED LOOP TRAFFIC SIGNAL SYSTEM - Use in all projects with any of the following the pay items: Wireless Intercn, Closed Loop, Master; Wireless Intercn, Closed Loop, Repeater; Wireless Intercn, Closed Loop, Remote; Wireless Intercn, Closed Loop, Rem; Wireless Intercn, Closed Loop, Salv.
20SP-820EE-02 LIGHT EMITTING DIODE CHANGEABLE MESSAGE, OPEN-CLOSED SIGN - Use in all projects with any of the following pay items: Sign, Changeable Message LED, Open-Closed; Sign, Changeable Message LED, Open-Closed, Rem; Sign, Changeable Message LED, Open-Closed, Salv. This FUSP is optional for local agency projects.
20SP-820F-02 PUSHBUTTON AND SIGN, SALVAGE - Use in all projects with any of the following pay items: Pushbutton and Sign, Salv.
20SP-820FF-01 TRAFFIC SIGNAL BACKPLATE - Use in all projects with any of the following the pay items: Backplate, TS; Backplate, TS, Rem; or Backplate, TS, Salv.
20SP-820G-01 WIRELESS INTERCONNECT FOR SIGN MOUNTED FLASHER - Use in all projects with any of the following pay items: Wireless Intercn, Sign Mtd Flasher Master; Wireless Intercn, Sign Mtd Flasher, Repeater; Wireless Intercn, Sign Mtd Flasher, Remote; Wireless Intercn, Sign Mtd Flasher, Solar Power, Master; Wireless Intercn, Sign Mtd Flasher, Solar Power, Repeater; Wireless Intercn, Sign Mtd Flasher, Solar Power, Remote; Wireless Intercn, Sign Mtd Flasher, Rem.
20SP-820GG-05 SPAN WIRE TETHER - Use in all projects with the pay item: Span Wire Tether. This FUSP is optional for local agency projects.
20SP-820H-03 MICROWAVE VEHICLE DETECTOR - Use in all projects with any of the following pay items: Detector, Microwave Vehicle; Detector, Microwave Vehicle, Rem; Detector, Microwave Vehicle, Salv; Ethernet Extension; Ethernet Extension, Rem; Ethernet Extension, Salv; Enclosure; Enclosure, Rem; Enclosure, Salv. This FUSP is optional for local agency projects.
20SP-820HH-03 TRAFFIC SIGNAL UNINTERRUPTIBLE POWER SYSTEM - Use in all trunkline projects requiring a new TS Uninterruptible Power System. This FUSP is optional for local agency projects.
20SP-820I-01 TRAFFIC SIGNAL WORK - CONSTRUCTION METHODS - Use in all projects that include traffic signal work, except the Road Commission of Oakland County.
20SP-820II-03 TRAFFIC SIGNAL MAST ARM POLE AND MAST ARM - Use in all projects with pay items: Mast Arm Pole, Cat __ and Mast Arm, __ foot, Cat __.
20SP-820J-01 VIDEO TRAFFIC DETECTION SYSTEM (MINI) - Use in all projects with any of the following pay items: Video Traffic Detection Camera (Mini); Video Traffic Detection System (Mini); Video Traffic Detection Camera (Mini), Rem; Video Traffic Detection System (Mini), Rem.
20SP-820JJ-01 SPAN WIRE - Use in all projects with the pay item: Span Wire.
20SP-820K-03 GLOBAL POSITIONING SYSTEM TIME SYNCHRONIZATION MODULE - Use in all trunkline projects that have any of the following the pay items: Global Positioning System Module; Global Positioning System Module, Rem; Global Positioning System Module, Salv. This FUSP is optional for local agency projects.
20SP-820KK-01 LONG LIFE LIGHT EMITTING DIODE TRAFFIC SIGNAL - Use in all projects requiring Long Life Light Emitting Diode Traffic Signal.
20SP-820L-03 TRAFFIC SIGNAL MANAGED FIELD ETHERNET SWITCH, COPPER ONLY - Use in all trunkline projects requiring a new TS, Managed Field Ethernet Switch, Layer 2, Copper; TS, Managed Field Ethernet Switch, Rem; or TS, Managed Field Ethernet Switch, Salv. This FUSP is optional for local agency projects.
20SP-820LL-01 MULTI-SENSOR (VIDEO AND RADAR) VEHICLE DETECTION SYSTEM - Use in all projects with any of the following pay items: Multi-Sensor Vehicle Detection System; Multi-Sensor Vehicle Detection System, Rem; Multi-Sensor Vehicle Detection System, Salv; Multi-Sensor Vehicle Detection Sensor; Multi-Sensor Vehicle Detection Sensor, Rem; Multi-Sensor Vehicle Detection Sensor, Salv.
20SP-820M-01 SOLID-STATE FLASHING BEACON CONTROLLER AND CABINET, SALVAGE - Use in all projects with pay item: Flsh Beacon, Controller and Cabinet, Solid State, Salv.
20SP-820MM-01 STEEL STRAIN POLE FOUNDATION REVISIONS - Use in all projects with pay item: Strain Pole, Steel, 6 bolt, Size __. This FUSP is optional for Local Agency Projects.
20SP-820N-01 HEMISPHERICAL VIDEO DETECTION - Use in all projects with any of these pay items: Hemispherical Video Detection Camera; Hemispherical Video Detection System; Hemispherical Video Detection Camera, Rem; Hemispherical Video Detection System, Rem; Hemispherical Video Detection Camera, Salv; Hemispherical Video Detection System, Salv.
20SP-820O-01 SOLID-STATE FLASHING BEACON CONTROLLER AND CABINET - Use in all projects with pay item: Flsh Beacon, Controller and Cabinet, Solid State.
20SP-820P-02 TRAFFIC SIGNAL WIRELESS COMMUNICATIONS LINK - Use in all projects with any of these pay items: TS, Wireless Link, (frequency), (type); TS, Wireless Link, Rem; TS, Wireless Link, Salv.
20SP-820Q-01 SOLAR POWER FLASHING BEACON, SINGLE OR DUAL - Use in all projects with any of the following pay items: Flsh Beacon, Solar Power; Flsh Beacon, Solar Power, Rem; Flsh Beacon, Solar Power, Dual; Flsh Beacon, Solar Power, Dual, Rem.
20SP-820R-02 RADAR VEHICLE PRESENCE STOP-BAR DETECTOR - Use in all projects with any of the following pay items: Radar Vehicle Presence Stop-Bar Detector System; Radar Vehicle Presence Stop-Bar Detector System, Rem; Radar Vehicle Presence Stop-Bar Detector System, Salv; Radar Vehicle Presence Stop-Bar Detector Sensor; Radar Vehicle Presence Stop-Bar Detector Sensor, Rem; Radar Vehicle Presence Stop-Bar Detector Sensor, Salv. This FUSP is optional for local agency projects.
20SP-820S-01 PEDESTAL FOUNDATION, FLUSH - Use in all projects with pay item: Pedestal Fdn, Flush.
20SP-820T-01 VIDEO TRAFFIC DETECTION SYSTEM - Use in all projects with any of the following pay items: Video Traffic Detection Camera, Span Wire Mtd; Video Traffic Detection Camera; Video Traffic Detection System; Video Traffic Detection Camera, Span Wire Mtd, Rem; Video Traffic Detection Camera, Rem; Video Traffic Detection System, Rem; Video Traffic Detection Camera, Span Wire Mtd, Salv; Video Traffic Detection Camera, Salv; Video Traffic Detection System, Salv.
20SP-820U-01 PEDESTAL, UNDER GROUND SERVICE, METERED AND UNMETERED - Use in all projects with either of these pay items: Pedestal, Underground Serv, (type); Pedestal, Underground Serv, Rem.
20SP-820V-02 RADAR VEHICLE DILEMMA ZONE DETECTOR - Use in all projects with any of the following pay items: Radar Vehicle Dilemma Zone Detector System; Radar Vehicle Dilemma Zone Detector System, Rem; Radar Vehicle Dilemma Zone Detector System, Salv; Radar Vehicle Dilemma Zone Detector Sensor; Radar Vehicle Dilemma Zone Detector Sensor, Rem; Radar Vehicle Dilemma Zone Detector Sensor, Salv. This FUSP is optional for local agency projects.
20SP-820W-03 WIRELESS VEHICLE DETECTION SYSTEM - Use in all projects with any of the following pay items: Wireless Vehicle Detection System; Wireless Vehicle Sensor Node; Wireless Repeater; Wireless Vehicle Detection System, Rem; Wireless Vehicle Sensor Node, Rem; Wireless Repeater, Rem; Wireless Vehicle Detection System, Salv; Wireless Repeater, Salv; Wireless Vehicle Sensor Node, Salv. This FUSP is optional for local agency projects.
20SP-820X-03 RADAR VEHICLE DETECTION RADIUS - Use in all trunkline projects requiring a new Radar Vehicle Detection Radius System; Radar Vehicle Detection Radius, Stop Bar Sensor; Radar Vehicle Detection Radius, Stop Bar Advance Sensor. This FUSP is optional for local agency projects.
20SP-820Z-03 NATIONAL ELECTRICAL MANUFACTURERS ASSOCIATION TYPE TRAFFIC SIGNAL CABINET - Use in all trunkline projects requiring a new: Cabinet, NEMA Type. This FUSP is optional for local agency projects.
20SP-822A-02 NON-FREEWAY SINUSOIDAL SHOULDER CORRUGATIONS - Use in all projects installing non-freeway sinusoidal shoulder corrugations.
20SP-824A-02 AUTOMATED MACHINE GUIDANCE - Use in all trunkline projects that include multiple course HMA or concrete paving and/or earthwork where survey control has been established and horizontal and vertical alignments were created as part of the design process and are included in the Reference Information Documents. Use in combination with the pay item Contractor Staking. Do not include the pay item Electronic Model Revision in the project. Do not use on local agency projects.
20SP-824B-02 STRUCTURE SURVEY DURING CONSTRUCTION - Use on all trunkline projects where the scope of work on the bridge includes a deck replacement, widening, superstructure replacement or complete bridge replacement. This FUSP is optional for Local Agency projects.
20SP-826A-02 GROUNDING, BONDING, LIGHTNING PROTECTION AND SURGE PROTECTION FOR ELECTRICAL SYSTEM EQUIPMENT - Use in all trunkline projects that require the installation of Intelligent Transportation System and Traffic Signal equipment. Do not use in local agency projects.
20SP-826B-03 MICROWAVE VEHICLE DETECTION SYSTEM - Use in trunkline ITS projects with any of the following pay items: Microwave Vehicle Detection System; Microwave Vehicle Detection System, Rem; Microwave Vehicle Detection System, Rem and Salv; Microwave Vehicle Detection System, Install Salv. Do not use in local agency projects.
20SP-826C-02 FIBER OPTICS - Use in all trunkline projects that require the installation, splicing, and testing of single mode fiber optic cable and fiber optic communications hardware. Do not use in local agency projects.
20SP-826D-01 MANAGED FIELD ETHERNET SWITCH - Use in all trunkline projects that require the installation and/or removal of a layer 2 or layer 3 managed field Ethernet switch. Do not use in Local Agency projects.
20SP-826E-01 POWER SERVICE - Use in all trunkline projects that require the installation of an Intelligent Transportation Systems (ITS) cabinet where there is no pre-existing power service. Do not use in local agency projects.
20SP-826F-04 SURVEILLANCE SYSTEM, REMOTE SITE - Use in all trunkline projects that require the installation of an Internet Protocol (IP) Closed-Circuit Television (CCTV) camera, camera lowering device, and portable camera lowering device tool. Do not use in local agency projects.
20SP-826G-01 UNINTERRUPTIBLE POWER SUPPLY FOR INTELLIGENT TRANSPORTATION SYSTEMS - Use in all trunkline projects that require the installation and/or removal of an indoor or outdoor uninterruptible power supply. Do not use in local agency projects.
20SP-826H-02 SYSTEM INTEGRATION AND TESTING - Use in all trunkline projects that require the installation of Intelligent Transportation Systems (ITS) equipment into the statewide ITS transportation operation center software. Do not use in local agency projects.
20SP-826I-05 SPUN CONCRETE POLE AND DRILLED SHAFT FOUNDATION - Use in all trunkline projects that require the installation of a Closed-Circuit Television (CCTV) camera where the mounting height must be 85 feet as a part of the Special Provision for Surveillance System Remote Site. Do not use in local agency projects.
20SP-826J-02 DYNAMIC MESSAGE SIGN SUPPORT STRUCTURE - Use in all trunkline Intelligent Transportation System (ITS) projects that require a new Dynamic Message Support Structure. Do not use in local agency projects.
20SP-826K-03 SMALL DYNAMIC MESSAGE SIGN SUPPORT STRUCTURE - Use in all trunkline Intelligent Transportation System projects that require a Small Dynamic Message Support Structure not for pre-existing DMS structure. Do not use in local agency projects.
20SP-826L-01 TELECOMMUNICATION AND VIDEO SURVEILLLANCE SERVICE OR EQUIPMENT - Use in all telecommunication projects that are Federally aided.
20SP-826M-01 ENVIRONMENTAL SENSOR STATION TOWER - Use in all trunkline projects that require a ESS Tower, not for pre-existing ESS Tower structures. Do not use in local agency projects.
20SP-826N-01 COMMUNICATION INFRASTRUCTURE RECONFIGURATION - Use in all trunkline projects that require the work at existing intelligent transportation system underground conduit or raceway communication infrastructure, includes handhole, and conduit reconfigurations. Do not use in local agency projects.
20SP-826O-01 INTELLIGENT TRANSPORTATION SYSTEMS CABINET AND CABINET EQUIPMENT - Use in all trunkline projects that require the work at new or existing intelligent transportation system cabinet work. In addition, a cabinet monitor system device is associated with each a cabinet. Do not use in local agency projects.
20SP-900A-01 (Required)
20SP-900A-01 INDUSTRIAL BY-PRODUCTS AND BENEFICIAL RE-USE - Use on all projects.
20SP-901A-01 PORTLAND CEMENT (TYPE IL) - Use in all projects that include Portland cement concrete and all projects that include Portland cement as constituent in the item of work.
20SP-902A-01 (Required)
20SP-902A-01 AGGREGATE, 46G - Use in all projects.
20SP-905A-01 STAINLESS STEEL REINFORCEMENT - Use in all projects with Reinforcement, Stainless Steel pay item, and in projects that utilize box beams with stainless steel reinforcement.
20SP-906A-01 STRUCTURAL STEEL FOUNDATION PILE POINTS - Use in all projects where pile points are specified.
20SP-907A-01 RECYCLED RUBBER OR PLASTIC PRODUCTS - Use with fence posts and woven wire fence pay items. This FUSP is optional for local agency projects.
20SP-908A-01 MISCELLANEOUS METAL PRODUCTS REVISIONS - Use in all projects specifying anchor bolts.
20SP-912A-01 MICRONIZED COPPER WATER BASED WOOD PRESERVATIVE SYSTEMS - Use in all projects where timber and lumber products are specified (except do not use with sign posts), including but not limited to guardrail posts, and timber piles.
20SP-912B-01 SAWN TIMBER POSTS AND BLOCKS FOR BEAM GUARDRAIL AND HIGHWAY SIGNS - Use in all projects where wood posts are specified. This FUSP is optional for local agency projects.
20SP-916C-01 REVISIONS TO PLAIN AND HEAVY RIPRAP SPECIFICATIONS - Use for all jobs with Riprap, Plain; Riprap, Plain, LM; Riprap, Heavy; and/or Riprap, Heavy, LM.
20SP-917A-01 TOPSOIL COMPOSITION - Use in all trunkline projects where salvaged or furnished topsoil is intended for use. This FUSP is optional for local agency projects.
20SP-918A-01 STEEL LIGHT STANDARD REVISIONS - Use in all projects including Light Standard Arm pay items.
20SP-918B-01 LIGHT STANDARD REVISIONS - Use in all projects with light standards.
20SP-918C-01 WOOD POLE REVISIONS - Use in all projects requiring WOOD POLE or WOOD POLE, CL __, __ foot.
20SP-919A-01 DELINEATOR HARDWARE - Use in all projects installing post-mounted delineators.
20SP-919B-01 PERMANENT TRAFFIC SIGNS AND SUPPORTS MATERIALS REVISIONS - Use in all projects with the pay item: Cantilever, Type __ and Truss, Type __, __ foot.
20SP-920A-02 WET REFLECTIVE PAVEMENT MARKINGS - Use in all projects installing wet reflective pavement markings.
20SP-920B-01 PAVEMENT MARKING SHELF LIFE - Use in all projects calling for temporary or permanent pavement markings.
20SP-922A-02 TEMPORARY PAVEMENT MARKING, TYPE R TAPE REVISION - Use on all trunkline projects with Pavt Mrkg, Wet Reflective, Type R, Tape, __inch, (color), Temp. This FUSP is optional for Local Agency projects.
20SP-922B-01 TEMPORARY WET REFLECTIVE PAVEMENT MARKINGS - Use in all projects with "Pavement Marking, Wet Reflective, Type NR Paint" pay items.